WRX-138SB

WRS Lenspanel with HR-Digaron-138mm Lens

WRX-138SB

WRS Lenspanel with HR-Digaron-138mm Lens

Rodenstock HR-Digaron-138 lens fitted with  X-Shutter for use on Cambo WRS and Phase One XT cameras. This is the short barrel version. It comes with a 48mm rear spacer with integrated tilt mechanism. For use on Phase One XT cameras the rear spacer can be replaced by an optional front spacer. Alternatively we can supply a long-barrel version of the lens.


Product details

The Rodenstock HR Digaron-SW float 138 mm f/6.5 is an exceptional sharp long focal length lens for adjustable technical cameras intended for a wide distance range from infinity up to an image scale 1:5 (β' = -0,2).

The optical design with eleven lens elements in ten groups is very complex for a prime lens. It has the highest possible resolving power extremely close to the diffraction limit. This is not only achieved across the entire field of the largest digital sensors – but also to the edge of the large 110mm image circle to allow for lens shifts and tilts.

The rotation of the focusing ring automatically controls the floating elements group and all aberrations are therefore minimized throughout the whole focusing range.

Even with extreme camera movements (shift and tilt) this lens provides an unprecedented sharpness to the corners as proven by the MTF curves given up to 80 lp/mm on the following pages 4 to 6. It provides negligible distortion (almost always below 1‰) and a total suppression of the chromatic aberration for perfect freedom from color fringing.

The image circle of the HR Digaron-SW float 138 mm f/6.5 has a constant diameter of 110 mm throughout its entire image scale range. For professional technical cameras, even with the largest sensor formats, this gives ample clearance for parallel shifts for perspective corrections (avoiding or reducing converging vertical lines). This also allows swing and tilt for extended depth of field without excessive stopping down of the aperture according to the Scheimpflug rule.

The broad focusing ring of the helical mount allows sensitive and precise focusing and automatically controls the adjustment of the floating elements group mentioned above.

 Shortest focus distance to objectapprox. 1,0 mtr
 Image circle of lens at any f/stop 110mm
 
Optical movements
 CCD size Movements
 37x37mm 33/33mm
 33x44mm 34/30mm
 36x48mm 30/26mm
 37x49mm 31/27mm
 40x54mm 28/24mm
 36x56mm 29/24mm

Please note that some optical movements may be larger than achievable due to mechanical limitation.

Datasheet